Welcome to visit the official website of Dongguan Senjia Machinery Co., Ltd
Dongguan City-kai Machinery Co., Ltd. official website
  • 1
  • 2
  • 3
  • SenJia Machiner

    Contact Us

    Dongguan Senjia Machinery Co., Ltd.,?

    [email protected]
    Skype: Sharonliu09
    Wechat :Sharon1619

    After the operation button broken line
    Re wiring the button line
    High pressure balancer
    Refer to the pressure curve, try to adjust the pressure to find the balance point.
    The machine is not blowing
    The reason is the electromagnetic valve or relay work is not often
    Tin scrape out tin bath
    The reason is that the speed of the tin is too fast, and there is a pitch control valve on the tail of the cylinder to control the pressure of the cylinder, so that it can be fast or slow.
    Don't shave tin tin
    Tin ash should be every day a clean-up. Tin quality differences, some tin produced many tin ash.
    Line mouth less than tin
    Check lines penetrated into tin. If there is immersed in tin, and then check the line whether immersed to help defend agent
    A total of 6 records
    Page:1 / 1